HeliCarrier Introduction

Why choose a Heli-Carrier ?
To enjoy 100% effortless handling Helicopter wheels free, Easy directional control, Quick & simple attachment To benefit from high clearance Clears 7" (18 cm), Ideal for slopes and curves To maintain traction on challenging terrain Large pneumatic traction wheels, 16"x6" (40 x 15 cm)


What are the advantages ?
Master Tough Environments: 1) Climb steep slopes 2) Cross hangar steps & rails 3) Operate on snow, ice, gravel & grass 4) Roll smoothly over pebbles & cracks 5) Lift high to clear obstacles & curves Enjoy Efficiency: 6) Be ready to take off in less than 5 minutes 7) Use brisk mode to cover long distances 8) End labor interruptions due to handling 9) Make pilots fully & safely autonomous within & outside regular business hours Ensure Personnel Safety: 10) Attach & drive carrier without risks of occupational injuries 11) Activating Brisk Speed Mode only possible when holding both grips 12) Hydraulic braking system for stops on slopes 13) Carrier automatically brakes to a stop when grip is released Protect Equipment: 14) View tail and blades by using the hand held control grip 15) Drive carrier under helicopter without need for precision 16) Position & attach carrier without contact with helicopter underbelly 17) Attach safely to standard skid wheel pins and simply rest arms against skids 18) Operate system in slow mode for delicate & precise manoeuvres into hangars 19) Perform easy & minimal maintenance of tough built Carrier Start enjoying helicopter handling 20) Transform the unpleasant task of manual helicopter handling into a pleasant, hassle free and quick task
How does it work ?

Built on a heavy frame U-shaped format the device actually kneels down in order to slide as low as possible under the helicopter belly. The carrier is then attached to the helicopter's existing wheel pins with simple hooks supported by easy rotating and extendable arms. Once hook step is completed the operator then swiftly rotates counterweight arms to come and rest against the skids at the forward end of the skids. The operator then lifts the helicopter with a simple hand grip control. The helicopter being in a tail heavy position then comes to rest firmly against the counterweight arms. The operator can then trigger helicopter handling as desired. The complete process is impressively efficient, being performed in less than five minutes with great ease!
How is it powered ?

The Heli-Carrier is powered by four 12 volts deep cycle batteries (choice of group 24 or group 27 size batteries). The unit is equipped with a hydraulic system that ensures powerful vertical (lifting) and horizontal (foward-backward) movements. A battery charger is supplied with the Carrier. It can be used on 115 or 230v.
What is the V1000 series ?
Helitowcart manufactures multiple product series. The V1000 series is dedicated to Heli-Carriers. Within this group a number of carrier models are available. Model numbers V1020, V1022, V1030, V1032 and V1040 are available. These are all built according to the same engineering concept. Their main differences are in regards to their respective load support capability, width and wheel type with 2 traction power capability. We invite you to view our website page titled "Heli-Carrier MODELS" to obtain more information about this product line.
Helicopter match ?
Find below an helicopter list that offers a quick view of types we can serve. Of course, if your helicopter is not listed, simply check with us, we can confirm compatibility easily.
Robinson	R22
	R44
	R44 clipper
Eurocopter	AS350	●
	AS355	●
	EC120	●
	EC130	●
	EC135	●
	EC145	●
	BK117	●
Bell	B206B	●
	B206L	●
	B407	●
	B204 - B212	●
	B427	●
	B429	●
	B430	●
MD	MD500	●
	MD600	●
	MD900	●
Enstrom	FX28
	F280
	F480
Agusta	A109
	A119	●
	A139
Schweizers	SW300